home *** CD-ROM | disk | FTP | other *** search
/ Night Owl 9 / Night Owl CD-ROM (NOPV9) (Night Owl Publisher) (1993).ISO / 050a / rread201.zip / RRCONFIG.DOC < prev    next >
Text File  |  1993-04-05  |  5KB  |  100 lines

  1.                ** RRCONFIG The RaLin Reader Configuration **
  2.  
  3.  NOTE: This is not an in-depth manual for RRCONFIG, as you only have a demo
  4.  version of the program. When you receive your registered version, you will
  5.  receive another manual, with full in-depth explanantions!
  6.  
  7.  RRCONFIG.EXE is the standalone program for configuring the editor used,
  8.  and the readers colors. I don't figure everyone will like the default
  9.  colors.<BIG GRIN>
  10.  
  11.  The version of RRCONFIG you have received is a DEMO version, named
  12.  CFGDEMO.EXE, it is identical to the working copy except that it will NOT
  13.  save the changes you make.
  14.  The FULLY working copy is what you receive with the registered version of
  15.  The RaLin Reader.
  16.  
  17.  But this DEMO copy will let you try out the color changes and see how they
  18.  will look in the program. You may also edit the editor name, and printer
  19.  control strings.
  20.  
  21.  The top part of the screen is where you edit all the configuration values.
  22.  The lower section has a listing of the command keys available to you.
  23.  And in between is a HELP line, it will display a line of text telling you
  24.  what each field is for, as you cursor through them.
  25.  A little more informative Help Screen is available with a F1 keypress.
  26.  
  27.  When RRCONFIG starts up it searches for an existing RRSET.CFG file. If
  28.  found it will display all values as found in that file. If not found, the
  29.  display and editor name will be listed using the built-in defaults, which
  30.  are the same as those used in the reader program. This file is looked for
  31.  first in the current directory, then in all directories listed in your
  32.  path.
  33.  
  34.  You may have multiple configuration files. The file is saved to whatever
  35.  directory you are in when you call RRCONFIG. RRCONFIG.EXE should be placed
  36.  in a directory that is in your Dos PATH statement, this way you can call it
  37.  from "any" directory on your hard drive. This is what allows you to have
  38.  multiple configuration files.
  39.  
  40.  You are placed in the first field. The Up and Down arrow keys will move you
  41.  from field to field. If you wish to edit the field, press F9 or ENTER.
  42.  This will place you in EDIT mode for that field. If you need to see a chart
  43.  of the color values you may enter, press F2.
  44.  
  45.  NOTE: You must press F2 to view the color chart BEFORE you go into edit
  46.  mode. When the clor chart is on screen, pressing any key will put it away.
  47.  The color values are shown in their corresponding colors. It is these
  48.  numbers you enter for the color you wish.
  49.  
  50.  At any time during configuration, pressing F5 will re-display the reader
  51.  representation using the colors as they are currently entered.
  52.  
  53.  A note on the Blinking status color. The color you choose will be
  54.  automatically adjusted to create the blinking forground. If you want bright
  55.  yellow on red, then enter 79. RRCONFIG will set the yellow to blinking
  56.  automatically.
  57.  
  58.  You will not be able to enter a value less than 1 or greater than 127.
  59.  
  60.  When you are editing a color value or the editor name, the editing keys are
  61.  the same as in the reader program, but we will list them here again.
  62.  
  63.    Editing keys are -
  64.     DeleteKey        - Delete character at the cursor.
  65.     LeftArrow        - Nondestructive move cursor to the left.     
  66.     RightArrow       - Nondestructive move cursor to the right.    
  67.     End              - Move cursor to end of input string.         
  68.     Home             - Move cursor to start of input string.       
  69.     Backspace        - Delete character to the left of cursor.
  70.     Ins              - Toggles insert mode, cursor changes to block.
  71.     Enter/Return     - Accepts value as entered.
  72.     Esc              - Exits Edit mode and leaves value unchanged.
  73.  
  74.  IMPORTANT NOTE:
  75.  
  76.  When entering the Printer Command codes for ALT-1,2,3 you must be sure to
  77.  abide by these simple rules: NO space at the beginning, ONE space between
  78.  each code, you MUST use DECIMAL numbers, no Hex or Characters for printer
  79.  codes. These codes can be found in your printer manual. Last but not least,
  80.  NO space at the end of the code string. Examples are given in the RRCONFIG
  81.  Help Screen, press F1.
  82.  
  83.  When you are done changing color values in RRCONFIG, press the
  84.  END key. If any changes have been made you will be asked if you want to
  85.  save these changes. Pressing 'Y' =or= ENTER will save the changes to the
  86.  configuration file RRSET.CFG  This file is saved in the directory you were
  87.  in when you fired up RRCONFIG.
  88.  
  89.  If you only wish to have 1 config file for the Reader, then RRSET.CFG
  90.  should be placed in a directory that is in your path statement,
  91.  so it can be found by the reader on startup.  Again, as mentioned earlier,
  92.  you may have multiple configuration files.
  93.  
  94.  RRCONFIG is a simple program, and really self-explanatory. You should have
  95.  no problem giving The RaLin Reader your own "special touch".
  96.  As features are added to the reader, RRCONFIG will be expanded to
  97.  accomodate the configuration of the new features.
  98.  
  99. <eof RRCONFIG.DOC>
  100.